OK. So. I've had my P-07 for a few years now and I bought the M-Carbo spring kit for it. I like the gun and don't want to mess it up. Is there any info on the long term reliability of the spring kit? I carry the gun occasionally but pretty much just keep it in the truck. Any info is appreciated.
M-Carbo kit.
1 - 9 of 9 Posts
i put the mcarbo kit in 2 of my p07s. it made a huge difference in DA and SA. i have about 600 rds though 1 p07 and 300 through another with no issues so far.
Joined
·
5 Posts
Three MCarbo kits in three guns. No problems and big improvement in trigger. Hope this helps. Good luck and good shooting my friend
Mcarbo claims their springs and parts for the CZ meet or exceed the quality of the OEM parts. having done 3 CZ spring kits so far i would have to agree. the Mcarbo roll pins are far superior to the CZ factory roll pins for sure. i would not expect any problems. the only thing i can ding Mcarbo for is that their videos are sometimes vague and may not have enough information for someone that is knew to a particular brand. maybe this is to get you to send your firearm to Mcarbo and pay $90 for them to do the work when you can't.
No not much so we’ll see how it goes. If I screw up to bad we have a good local CZ guy so I’m not real scared lol
watch the video a couple of times before you get started. you will need a set of roll pin punches. i would recommend something like this wheeler gunsmithing kit. i augmented it with some individual tekton roll pin punches as they are a little longer. if you have a dremel tool with a cloth polishing bit and some Flitz you can polish the trigger system surfaces which helps a lot.
Attachments
1 - 9 of 9 Posts
