CZ Firearm Forums : CZTalk banner
1 - 6 of 6 Posts

·
Registered
Joined
·
10 Posts
Good grief, people! I belong to a lot of different gun forums for various brands and shooting disciplines. I can say that, without a doubt, the CZ community is the least dynamic, least active of all of them! What’s going on? Why aren’t people more excited about our CZ’s and talking about them?

And it’s not just here...the other CZ forums are equally dead. Just look at the forum lists...some haven’t been touched in months (or longer)! Yet I can go onto someplace like Sig Talk or The High Road and there are new posts every 5 minutes. This could (and should) be such a great resource for people who own and love CZ’s, but instead it’s just crickets. 🦗

It’s just puzzling that no one seems to want to talk about their CZ’s (or anything else for that matter), when other gun communities are so active. I was hoping to learn a lot more about my CZ guns, but there seem to be more CZ posts on the Sig forums than there are here. 🙁
Sorry, busy working to support illegal aliens, millennials, and the others who believe they’re entitled to my taxes. Oh, and ammo isn’t cheap these days. When I’m not working, sleeping, looking for ammo deals or shooting my CZ Bren 2 7.62, CZ Scorpion Micro, or multiple CZ75 PO1 Compacts... I’m staring at my suppressed HK MR762 A1 I have on lay away. They let me have conjugal visits with her at the range until my stamp comes in and it’s paid off. I hope you understand.
 

·
Registered
Joined
·
10 Posts
Lmao I like it sounds allot like myself. What barrel length Bren 2 in 7.62 do you have and do you feed it Russian steel case?
No, never. I know it can eat it up like no tomorrow, but why damage my barrel during these times. I have several thousand rounds on stand by though. I chose the 14” barrel and regret it. I should have just went with the 10”. I did pick up some of that Maxim TUI ammo recently designed specifically for short barrels. Looking forward to mixing up some gelatin and testing it myself. I put a VCOG on it, but will be putting that on the HK when she’s free. I have an EOTECH that will be replacing it. Do you have one and if so, have you used the steel cased ammo and what are the consequences? I am curious.
 

·
Registered
Joined
·
10 Posts
I did misspeak regarding corrosive vs. non corrosive steel case ammo. I still don’t use it and it sits in a closet. I rarely have the luxury of shooting outside. I have to drive for couple hours to do so and not a single range near me allows steel cased ammo. What do you know about Tula? I’m not an expert on it and won’t pretend to be.
 

·
Registered
Joined
·
10 Posts
I didn’t even know there was a “range friendly” version of Tula. Yeah, brass 7.62 is the hardest to find right now. Even using the wiki arms ammo engine... it’s slim pickings.
 

·
Registered
Joined
·
10 Posts
The mags are easier to find now. D&L is the largest importer of CZ products from what I understand. When I can’t find something, I usually turn to them and they can get it. Bought ten and tossed them in the safe. The black polymer ones hold up better that the clear ones. The feed lips fail on those.
 

·
Registered
Joined
·
10 Posts
My range allows any casings -- as long as the steel and aluminum don't end up in the brass bucket!!

Lookie here -- we've generated more posts in this one thread than the rest of the entire forum has done in a week! 😄
Lol... I could talk about guns for hours, but I actually have to go work now. Employees doing dumb stuff in the field and it’ll only escalate if I sit in the office. Peace.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top