Rummaging through my box of mags I found two 19rd mags for a 75B. They work fine in my P01 but not atheistically pleasing due to the gap. After spending hours on the internet trying to find a gap filler I decided to make my own.
I used JB Weld Epoxy Plastic Stick as the filler material. Removing the base I used a Dremel tool to carve the front out and prep the base for the epoxy. Press-and-Seal was used as a barrier on the steel mag and the frame. I used half of the stick and mixed it. Squishing it into place to form what I thought would look good. I let it cure overnight. I used a file and 320 grit sandpaper to form the epoxy. I painted it with rattle can flexible bumper paint.
I used JB Weld Epoxy Plastic Stick as the filler material. Removing the base I used a Dremel tool to carve the front out and prep the base for the epoxy. Press-and-Seal was used as a barrier on the steel mag and the frame. I used half of the stick and mixed it. Squishing it into place to form what I thought would look good. I let it cure overnight. I used a file and 320 grit sandpaper to form the epoxy. I painted it with rattle can flexible bumper paint.
